Repair clip dv mode only, Repair clip, Dv mode only – FOCUS Enhancements FS-C User Manual
Page 103
FS-C Functions
87
Repair Clip
DV Mode only
Use this function to repair a specific file that may be damaged
or incomplete. For example, recording terminates due to a loss
of power to the FS-C and a specific file may be damaged.
Repair Clip scans the specified file checking for and repairing
file errors and incomplete files. When the file is repaired it then
can be used in the NLE system.
1.
From the Utilities screen, go to
Repair Clip
.
2.
Enter the number of the clip to be repaired, using the
Up
and
Down
navigation buttons.
3.
Press
YES
and the FS-C begins repairing the file.
A status screen displays the progress of disk repair and at
completion displays the message:
•
Complete
indicating Repair Disk was successful.
•
Aborted
indicating that there were errors and the repair did
not complete.
4.
Press
BACK
to return to the
Utilities
screen.
5.
Move content from the FS-C.
6.
Use Format Disk utility before doing any further recording. This
step optimizes disk storage, see
REPAIR CLIP
CLIP 001
YES BACK