Fs-c using with a computer – FOCUS Enhancements FS-C User Manual
Page 51
35
FS-C
Using with a Computer
Once video clips are recorded to the FS-C it is possible to use those
clips in most computer based DV/HD NLE systems. This section
contains the following:
Initial Setup ......................................................................... 36
Mounting the FS-C in Windows ........................................... 37
FS-C and FAT 32 ................................................................. 40
Using Avid OMF Clips (Required for DV mode only) ........... 41
Dismounting the FS-C (Windows)........................................ 44
Mounting the FS-C (Macintosh) .......................................... 45
Dismounting the FS-C (Macintosh) ..................................... 46
In the past, to get footage into an NLE system, it was necessary
to capture / digitize the footage using a video capture card. For
most DV and some HDV compatible NLE systems, FS-C DTE
functionality eliminates the capture stage. All that is necessary
is the moving of the video files from the FS-C to a computer.
Recording for Unsupported NLE
If a desired NLE is not supported by Focus Enhancements DTE, it is
necessary to use the AV/C control to capture the video footage for editing.
For more details refer to