Disp (display) information fields – FOCUS Enhancements FS-C User Manual
Page 68
FS-C Functions
52
10.
Reel Display
In
Record
or
Playback
modes, this item displays the particular
REEL that a clip is located in or, has been marked to. If in
PLAY FROM
>
REEL LIST
mode, the REEL appears in
brackets for example, [REEL]. This area is blank if
NO
REEL
has been selected.
11.
DISP
information field that displays data type.
12.
DISP
information field that displays current data.
DISP (display) Information Fields
Use the
DISP
function button to display current operation
information fields 11 and 12. The data shown depends on
the mode of operation, i.e. DV or HD Recorder.
Pressing the
DISP
button advances the display to the next
category of information. Below is a table of the data types
and data available with
DISP
.
Field
Number
Data Type /
Data Description
11
COUNTER
12
Shows frame count of current video clip during record or
playback.
11
REMAINING
12
Record
: counts down number of available frames
remaining, as time, on a specific disk.
Playback
: displays time remaining of the current clip.
11
DV (NTSC or PAL) or HD (see note following table)
12
The type of timecode displayed in
HD RECORDER
mode from this screen is defined by the
HDV TC TYPE
setting. See
HDV TC TYPE
Record
: displays the external timecode value being
generated by a camcorder or other device during a
recording session. Timecode mode must be set to
EXT
TC
for this function to operate, refer to
Playback
: displays the embedded DV timecode value in
a particular track.
11
UB NTSC