8 grounding alarm (c-map specification) – Furuno 1724C User Manual

Page 125

Advertising
background image

3. PLOTTER OPERATION

3-54

3.11.8 Grounding alarm (C-MAP specification)

The grounding alarm feature continuously scans the electronic chart data in front of the boat
to detect charted rocks, shoals, obstructions and land areas that could pose a threat if the
vessel were to continue along its current course. The area searched is user-definable and is
identified by a red triangle on the screen.

Note:

This function only checks objects that appear on the chart and is therefore limited by

the accuracy of the original source material from which the electronic charts where
produced.


1. Press the ALARM key to open the alarm menu.
2. Choose GROUNDING ALARM from page 2 of the ALARM menu.
3. Press the EDIT soft key to show the grounding alarm window.

GROUNDING ALARM

¡

ON 0.500 ft

¤

OFF

Grounding alarm window

4. Select ON.
5. Use the Cursor pad and the ENTER knob to enter alarm setting: Operate the Cursor

pad

to select digit; use the ENTER knob to enter value. The setting range is 0-9999.9, in

increments of 0.001 nm (km)

6. Press the ENTER soft key or push the ENTER knob to register setting.
7. Press the ALARM key to finish.

Advertising
This manual is related to the following products: