Furuno 1724C - Manual (Page 189)

7. CUSTOMIZING YOUR UNIT
7-26
7.7.2 GPS receiver setup (Set equipped with GP-310B/320B)
The GPS SETUP menu sets up the GPS Receiver GP-320B. Press the MENU key followed
by the SYSTEM CONFIGURATION, NAV OPTION and GPS SENSOR SETTINGS soft
keys to display this menu.
GPS
SETUP
EDIT
GEODETIC DATUM
WGS-84
POSITION SMOOTHING
000 second(s)
SPD/CSE SMOOTHING
005 second(s)
LATITUDE OFFSET
0.000’N
LONGITUDE OFFSET
0.000’E
DISABLE SATELLITE
_ _ _ _ _ _
LATITUDE
38 00.000’ N
LONGITUDE
123 00.000’ E
ANTENNA HEIGHT
005 m
GPS FIX MODE
2D/3D
COLD START
NO
RETURN
GPS
STATUS
WAAS
SETUP*
*: Only when the GP-320B is connected.
GPS setup menu
Contents of GPS setup menu
Item Description Settings
Geodetic Datum Geodetic datum is a reference for geodetic
survey measurements consisting of fixed
latitude, longitude and azimuth values
associated with a defined station of
reference. You must have the correct
geodetic datum selected in your plotter so
that it will reference the correct point on
the chart for a given latitude and longitude.
Although WGS-84 is now the world
standard, other categories of charts still
exist. Refer to Appendix for a full list of
geodetic datum. See Appendix for full list.
(Con’t on next page)