Furuno 1724C - Manual (Page 187)

7. CUSTOMIZING YOUR UNIT
7-24
3. Rotate the ENTER knob to select the full-screen picture desired and push the ENTER
knob. A set of combination screens, corresponding to the full-screen selected, appears.
10
20
--
--
--
--
HOT PAGE 1
Combination screen selection window
4. Rotate the ENTER knob to select the full screen or combination screen desired and
push it to set.
7.7 Navigator Setup
This section provides the information necessary for selecting the type of navigator
connected to your plotter.
7.7.1 Navigation data source
The NAV SETUP menu mainly selects the source of
nav data. For GPS receiver other than the GP-320B,
speed averaging and local time offset (to use local
time) are also available. Press the MENU key
followed by the SYSTEM CONFIGURATION, NAV
OPTION and NAV SOURCE SETTINGS soft keys to
display this menu.
NAV
SETUP
RETURN
EDIT
POSITION SOURCE
ALL
SPEED SOURCE
ETR
TEMPERATURE SOURCE
ETR
DEPTH SOURCE
ETR
STW CALIBRATION
+00%
TEMP CALIBRATION
+00.0 F
DEPTH CALIBRATION
+00ft
WIND AVERAGING
001 seconds (s)
WIND DIRECTION OFFSET
S000.0
WIND SPEED CALIBRATION
+00%
STW
30.0kt
DEPTH
50.0ft
WIND SPEED
--.-kt TEMP
+41.3 F
WIND DIR
---.-