2 valve removal tools – FMC Corporation - Talstar FMC L06 User Manual

Page 44

Advertising
background image

Doc No: OMM50000903

Rev: B Page 44 of 65

Subject to contractual terms and conditions to the contrary, this document and all the information contained herein are the confidential and exclusive

property of FMC Technologies, and may not be reproduced, disclosed, or made public in any manner prior to express written authorization by FMC.

10.3.2.2

Valve Removal Tools

There are three (3) Knock Out tools available for removing valves from “L” series
pumps. The P534695 Small Ball Knock Out tool is the preferred tool for the smaller
valves in the L06 and L09 pumps. The P504436 Knock Out tool can also be used on
the smaller valves in the L06 and L09 pumps. The P534694 Large Ball Knock Out tool
is designed for the larger valves in the L11 through L16 pumps. The valves and
appropriate tools are listed in Table 7.

Figure 14: Illustration of the P534694 and P534695 Ball Knock Out Tools

The suction valve is removed first.

All Knock Out tools are used in a similar manner to the P504436 tool shown in section
10.3.1.2. The P534694 or P534695 ball type tools are used with the ball end positioned
against the bottom of the valve seat.

Advertising