Fishman AIRFREE LDS9000 - Manual (Page 14)

14
Program Function
Follow These Steps to Input a Program
• Press the NEXT key
Use the left and right arrow keys to select
your syringe size.
Enter your dispense volume by using the
keypad to enter your volume followed by
pressing the ENTER key or use the left or
right arrows to use the SpeedBar
TM feature*.
Enter your dispense rate by using the keypad
to enter the volume followed by pressing the
ENTER
key or use the left or right arrows to
use the SpeedBar TM feature*.
Enter the amount of back off by using the
keypad followed by pressing the ENTER key
or use the left or right arrows to use the
SpeedBar
TM feature*.
Enter the amount of delay (0-9 seconds)
between forward and reverse motion by using
the keypad followed by the ENTER key. 5
4
3
2
1
< -SYRINGE SIZE- >
3 5 10 30
.01 cc
.00261-12.2335
.392 cc/sec
.065 - 1.567
5 STEPS
0 - 500
0 seconds
.00 - 10.00
1
2
3
4
5
< - SHOT SIZE - >
0cc 12cc
8
* Speedbar TM —This feature is available in the volume input,
dispense rate input and backoff input. Hold down the left or
right arrow key to make this feature appear. Continue
holding to make the bar increase or decrease. The longer
you hold, the faster the bar moves. When satisfied, release
the key and Speedbar
TM will show you your selected volume.
The LDS9000 AirFree TM Dispensing system allows 10 user-defined
programs to be stored in memory, ranging from 0 to 9. The program stores:
• Barrel reservoir size
• Deposit volume
• Dispense rate
• Backoff or Pullback
• Delay between forward and reverse motion