Foster Built-in-oven 7120 043 - Manual (Page 22)

Semiautomatic operation with cooking duration
Select cooking duration function and set required duration with
the +/-
keys on the right. “AUTO” (B) and cookpot (C) symbols appear.
If time of day = cooking end time the relay output and the cookpot
symbol (C) are switched off. The audible signal sounds.
The symbol “AUTO” (B) blinks. The cooking will be finished.
Semiautomatic operation with cooking end time
Select cooking end time function and set required end time
using the +
/- keys on the right. The “AUTO” (B) and cookpot (C)
symbols appear. Turn the switch knob and the thermostat knob to
the cooking function and to the desired temperature.
If time of day = cooking end time the oven doesn’t heat any longer
and the cookpot symbol (C) are switched off. The audible signal
sounds and “AUTO” (B) blinks.
Fully automatic operation
1) Set the length of cooking time by pushing the button and the
+
/- keys on the right.
2) Set the end of cooking time by pushing the button and the
+
/- keys on the right.
3) Set temperature and cooking program by using the thermostat
knob and the selector knob.
After this setting the symbol “AUTO” (B) will appear, this means
the oven has been programmed. When the time in the display is the
same of the cooking start time the cookpot symbol (C) will appear
and the oven will start to work.
Cooking Start Time= Cooking End Time – Cooking Duration Time
An example: cooking lasts 45 minutes and is expected to stop at
14.00.
- Push and “+” key
on the right until having set 0.45.
- Push and “+” key on the right until having set 14.00.
After having finished the setting, the clock hour will appear on the
panel and “AUTO” symbol (B) will flash permanently. This means
the cooking program has been memorized.
21