Foster Built-in-oven 7120 043 - Manual (Page 33)

Replacing the oven light - Pic. 14
The oven is equipped with a lamp having the
following features:
25W
screw cap E-14
T 300° C
WARNING: disconnect the appliance from the
power supply.
lf the oven light needs to be replaced, the
protective cover «A» must be removed by
turning it anticlockwise. After the light has
been replace, refit the protective cover «A».
(Pic. 14).
Removing the oven door -Pic. 15
To aid cleaning and make access to the oven
interior easier, the oven door can be simply
removed.
To facilitate cleaning of the oven, the door can
be removed via the hinges as follows:
hinges with movable bolt
We recommend to take the handle in the middle
when opening the oven door.
With the door open, you can see the 2 hinges A
which are provided with 2 movable bolts B.
When the bolt B is raised, the hinge is released
from its housing.
Having done this, the door must be lifted
upwards and removed, sliding it towards the
outside;
grip the sides of the door near the hinges when
performing these operations.
To refit the door, firstly slide the hinges into
their slots.
Before closing the door, remember to rotate
the two movable bolts B used to hook the two
hinges.
Pic. 15
A
B
Pic. 14
32