Foster Built-in-oven 7120 043 - Manual (Page 28)

AUTOMATIC OPERATION
It is recommended to set the duration and the end of cooking
Switch on the oven by pressing and releasing the , then press and release the key
and set the duration of cooking with the and keys.
Then you will hear a sound signal and the timer will show the current hour. Press the key
and set the end of cooking with the and key.
Another sound signal will be heard and the 2 dots stop blinking: this means the time has
been set.
On the display you will see the set time, the temperature and function.
The oven light turns off.
Now select an available cooking function with the
and keys.
The oven suggests a preset temperature for each function, which can be changed by using
the keys and .
Once the 2 dots have stopped blinking, the oven begins the delayed start mode: it will
automatically start for the requested duration and stop at the requested time.
When the oven is cooking, you see the selected temperature, the current hour and the
selected function on the corresponding displays. The internal oven light turns off.
However, both the temperature and the function can be changed by repeating the above
mentioned instructions.
At the end of the program, the oven beeps, the temperature display and the cooking function
display turn off, the timer display shows the current hour and the 2 symbols
and
A
blink.
To stop the soud signal or to cancel the program just push one of the following keys:
The symbol appears on the function display and then the oven light turns on.
Now the oven is ready to be programmed again; you can select a new cooking function or
switch the oven off by pressing and releasing the key
.
AUTOMATIC AND SEMIAUTOMATIC COOKING RESTRICTIONS
The preheating (PRH) and defrosting functions are not compatible with the above mentioned
automatic and semiautomatic operation.
-After setting the preheating or the defrosting function, it is not possible to set either the
duration or the end of cooking.
-When programming the oven with the automatic operation, you cannot choose the
preheating or the defrosting function.
ON/OFF
ON/OFF
-
+
-
+
STOP
STOP
-
+
27