Foster Built-in-oven 7120 043 - Manual (Page 26)

FUNCTION BUTTONS
Decreases temperature
Increases temperature
ON/OFF and Controls Lock Function
Minute minder
Cooking time
End time
Time setting
Time setting
Program setting
Program setting
OPERATION
The timer flashes on the display when switched on for the first time or after a power cut, and the oven cannot be
operated; follow the “Setting the time” procedure to start it.
SETTING THE TIME
Press buttons and simultaneously and then release them.
Use buttons and to set the exact time.
Note: this operation must be completed in 3 sec. time, while the 2 dots on the timer display keep flashing.
Once you have completed the time setting, wait for the 2 dots stop flashing.
SOUND SIGNAL
The oven performs sound signals to show different functions, as for example the end of cooking.
There are 3 different sound levels, which can be modified:
When the oven is switched off, press the key, and with each pressure the oven performs the sound to a different
level; the last one performed will be automatically set.
SWITCHING ON THE OVEN
Press and release the
key, then you will hear a sound signal.
The timer display will show ON , the bulb symbol lights on and the internal oven light turns on. Now you can
proceed to set a cooking function.
MINUTE MINDER
The minute minder is only a counter of time and it is totally independent from any cooking function.
It can be useful, for example, when set to remember to stop a cooking operation. It can be used also when the oven is switched off.
To set the minute minder, switch on the oven by pressing and releasing the key, then press the key:
The display reset to zero and the 2 dots start flashing. Now you have 3 seconds to set the desired time by using the
keys and
up to 23h59m.
Once the set time has elapsed, you will hear a sound signal and the symbol flashes.
To stop the sound and the flashing symbol just press one of the following keys
MANUAL OPERATION FOR AN INDEFINITE PERIOD OF TIME
Switch on the oven and select an available cooking function using the keys and :
The oven will suggest a preset temperature, which can be changed by using the keys and . The oven will
start working up to the preset temperature and the centigrade degree symbol ° starts blinking, which means the preheating
of the oven.
When the requested temperature is reached this symbol stops blinking and the oven beeps.
To switch off the oven, just press and release the key.
ON/OFF
STOP
__
+
STOP
_
+
_
ON/OFF
ON/OFF
_
+
STOP _
+
ON/OFF
25