Freedom9 IP 100 - Manual (Page 60)

• Force Composite Sync (Required for Sun Computers): To support signal transmission
from a Sun machine, enable this option. If not enabled, the picture of the remote console will
not be visible.
6.5 Device Settings
The Device Settings menu allows the user to configure the freeView IP 100 itself.
6.5.1 Network
The Network Settings panel as shown in Figure 6-25 allows network related parameters to be
changed. Each parameter will be explained below. Once applied the new network settings will
immediately come into effect.
Note: See Section 4 for instructions on installing the freeView IP 100 initially.
Note: Changing the device’s network settings may result in loss of connection if the supplied
network settings are incorrect.
58