Freedom9 IP 100 - Manual (Page 67)

freeView IP 100 User’s Manual
Country (ISO code): The country where the organization is located. This is the two-letter ISO
code, e.g. DE for Germany, CA for Canada, or US for the USA.
Challenge Password: Some certification authorities require a challenge password to authorize
later changes to the certificate (e.g. revocation of the certificate). The minimum length of this
password is 4 characters.
Confirm Challenge Password: Confirmation of the Challenge Password
Email: The email address of a contact person that is responsible for the unit and its security.
Key length: This is the length of the generated key in bits. 1024 Bits is sufficient for most cases.
Longer keys may result in slower response time of the device during connection establishment.
6.5.5 Serial Port
Figure 6-31: Serial Port
The freeView IP 100’s Serial Settings (Figure 6-31) allows the user to specify what type of device
is connected to the serial port and how to use it.
Configuration or console login: Do not use the serial port for any special function, use it only
for the initial configuration (see Table 4-1).
Modem: The freeView IP 100 offers remote access using a telephone line in addition to the
standard access over the Ethernet network. The modem needs to be connected to the serial
65