Foundry Networks M2404F - Manual (Page 3)

Foundry NetIron M2404C/M2404F Metro Access Switches
January 2007 © 2007 Foundry Networks, Inc. ii
Safety Considerations
This equipment is for use in a restricted access area by qualified personnel only. To avoid
electric shock, do not perform any servicing other than those contained in the unpacking
instructions.
This equipment contains Electrostatic Discharge (ESD) sensitive components. Use ESD
protection before servicing or installing components of this system.
CAUTION Changes or modifications made to this device that are not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
CAUTION Remove the power cord from a power supply before you install it in or
remove it from the device. Otherwise, the power supply or the device could
be damaged as a result. (The device can be running while a power supply is
being installed or removed, but the power supply itself should not be
connected to a power source.)
CAUTION All devices with DC power supplies are intended for installation in restricted
access areas only. A restricted access area is where access can be gained only
by service personnel through the use of a special tool, lock and key, or other
means of security, and is controlled by the authority responsible for the
location.
WARNING
The equipment is designed to be used with Class 1 Laser fiber optic
transmitters which may endanger your eyes.
Do not look directly into the fiber optic cables or transmitter.
WARNING
HIGH VOLTAGE
Disconnect the product from the power line before removing the cover.
Any adjustment and maintenance of the opened device should be done
only while the device is disconnected from its source of power and should
only be performed by qualified personnel, authorized by Foundry
Networks.