Foundry Networks M2404F - Manual (Page 33)

Foundry NetIron M2404C/M2404F Metro Access Switches
January 2007 © 2007 Foundry Networks, Inc. 27
1. Copy the device software image file to the appropriate TFTP directory on the
workstation.
2. Log into the switch through the console port or through a Telnet session. If you log in
using Telnet, your Telnet session will disconnect when you reset the switch to run the
new software.
3. Make sure there is enough free space on the device file system. Use “dir” command
for this. Free disk space should be at least 0.5MB larger then the downloaded
application size.
Example:
device-name#dir
Listing Directory flash:/:
d S 2048 Jun 30 2005 17:56 Boot/
d S 2048 Jan 1 1993 00:04 Etc/
d S 2048 Jun 14 2005 12:01 Java/
d S 2048 Jan 1 1980 00:00 Log/
d S 2048 Jul 5 2005 21:36 Usr/
d SH 2048 Jan 1 1980 00:00 Hidden/
- 260 Jan 1 1993 00:00 profile.cfg
- 43796 Jul 5 2005 21:26 dflt_startup_bin.cfg
- 5382 Jul 5 2005 21:26 dflt_startup.cfg
Free disk space 5655104
4. If there is not enough free space, delete unnecessary files. This is done by using “del”
command.
device-name#del <filename>
Example:
device-name#del /Boot/Oldimage.bin
5. Download the device software image from the TFTP server using the copy
application command in Privileged (Enable) mode:
device-name#copy application <TFTP URL> [<destination file name>]
Example:
device-name#copy application tftp://192.192.54.10/M2404Cv2.0.bin
NOTE The switch remains operational while the image is downloaded.
The application is downloaded into /Boot directory.