Fortinet FortiGate Voice 4.0 MR1 - Manual (Page 49)

FortiGate Voice VoIP, PBX, and PSTN CLI Reference config pbx dialplan
FortiGate Voice Version 4.0 MR1 Administration Guide
01-410-112851-20100601
49
http://docs.fortinet.com/ • Feedback
FortiGate Voice VoIP, PBX, and PSTN
CLI Reference
This section describes FortiGate Voice VoIP, PBX, and PSTN configuration settings.
PSTN interfaces are not available on all FortiGate Voice models. For information about
other FortiGate Voice CLI commands see the
FortiGate CLI Reference .
This section describes:
•
config pbx dialplan
• config pbx did
• config pbx extension
• config pbx global
• config pbx ringgrp
• config pbx smtp
• config pbx voice-menu
• config pbx voip-provider
• config system pstn
• config system interface
• execute pbx
• diagnose pbx restart
config pbx dialplan
Use this command to add a dial plan and add rules to the dial plan. A dial plan rule
indicates an outgoing destination to send calls to. You can add multiple rules to a dial
plan. You add dial plans to extensions to control how to handle outgoing calls from the
extension.
Syntax
config pbx dialplan
edit <pbx_dialplan_name>
set comments <comment_string>
config rule
edit <rule_name_str>
set action {allow | block}
set callthrough {fxo1 | fxo2 | fxo3 | fx04 |
<voip_providers>}
set outgoing-prefix <pattern_str>
set phone-no-beginwith <patern_str>
set prepend <pattern_str>
set use-global-outgoing-prefix {no | yes}
end
end