Fortinet FortiGate Voice 4.0 MR1 - Manual (Page 54)

config pbx smtp FortiGate Voice VoIP, PBX, and PSTN CLI Reference
FortiGate Voice Version 4.0 MR1 Administration Guide
54 01-410-112851-20100601
http://docs.fortinet.com/ • Feedback
Syntax
config pbx ringgrp
edit <ring_group_name>
set description <description_str>
set member <acd_group_member>
set no-answer-action {hangup | ivr | voicemail}
set strategy {ring-all | sequential}
set voicemail-of-extension <extension_number>
end
config pbx smtp
Use this command to configure the FortiGate Voice unit to send voicemail notification
email messages. Using this command you configure the email server that the FortiGate
Voice unit sends email notifications to.
Syntax
config pbx smtp
set port <smtp_server_port>
set server <smtp_server_ip_ address>
set authenticate {enable | disable}
set password <password_str>
set username <username_str>
end
Variables Description Default
edit
<ring_group_name> Enter the name for the group. No
default.
description
<description_str> A description of the extension group.
member
<acd_group_member> Enter the ACD member for the group. No
default
no-answer-action
{hangup | ivr |
voicemail} Enter the action that will be taken when none of the
extensions in the ring group answers.
•
hangup hand up and end the call.
• ivr return the caller to the attendant where they can
try another extension.
• voicemail the caller is directed to the voicemail
system where they can leave a message.
No
default
strategy {ring-all |
sequential} Control how the extensions in the group are called by the
ring group.
•
ring-all calls all of the extensions in the group at
the same time.
• sequential calls the extensions in the group one at a
time in the order in which they have been added to the
group.
No
default
voicemail-of-
extension
<extension_number> Enter the extension number to use for voicemail if no one
answers the call and no-answer-action is set to
voicemail.
No
default