Furuno FM-8800D/8800S - Manual (Page 119)

APPENDIX
AP-19
Thermal Printer UTP-80FK
1. Printer usage cautions
• Do not disassemble or attempt to repair the printer.
• Do not allow water to enter the printer.
• Do not drop or jar the printer.
• Fix a paper jam after turning off the power.
• Turn off the power when there is some problem (for example, strange smell or smoke),
and confirm that the trouble is not continuous.
2. Paper usage cautions
The surface of the thermal paper is coated with special chemicals and the characters are
printed out by thermochemical reaction.
• Use specified thermal roll paper.
• Keep in a cool, dry place.
• Keep paper away from hard objects, solvents and vinyl film to prevent paper
discoloration.
• Use water-based glue (starch glue, synthetic glue, etc.) when pasting thermal paper.
• Adhesive tape can discolor the thermal paper. Use double-sided tape on the reverse
side of the paper.
• Do not touch the paper with wet hands. Fingerprints may appear on the recording or the
recording may become blurred.
3. Specifications, Parts of the Printer
Specifications
1. Thermal roll paper
• Paper type: P-80-25 (Code NO. 000-805-578)
• Width of paper: 80 mm
• External diameter of roll paper: 48mm
• Length of paper: 25m
2. Environmental conditions
• Useable temperature: 0 to +50°C
• Storage temperature: -20 to +60°C
• Useable and storage humidity: 35 to 85% (no condensation)