Furuno FM-8800D/8800S - Manual (Page 72)

3. DSC OPERATION FOR NON-DISTRESS CASES
3-28
Manual reply
1. When a polling request call is received and the setting of POLLING CALL on
the system setup menu is OFF, the display changes as shown in the
illustration below and the audio alarm sounds.
Position request
call received.
FROM : 123456789
ROUTINE
TCmd1 : POLLING
TCmd2 : NO INFO
CANCEL ALARM
2. Press the CANCEL key to silence the alarm. The display changes as below.
** Received Message **
APR01/ 04 12 : 34 ECC : OK
POLLING CALL
ROUTINE
TCmd1 : POLLING
TCmd2 : NO INFO
FROM : 123456789
PRESS ENT TO ACK.
3. To respond to the call, press the ENT key. The following pop-up window
appears.
ANSWER
NO ANSWER
4. Choose ANSWER by the CH knob and press the CALL key to send the
polling acknowledge call. Then the standby display appears.
To send no reply, choose NO ANSWER and press the ENT key twice to
return to the standby display.