Order information, Focus enhancements, inc – FOCUS Enhancements FS453 User Manual
Page 41
FS453/4 AND FS455/6
DATA SHEET: HARDWARE REFERENCE
11. Order Information
Order Number
Temperature Range
Screening
Package
Product
444-2133
0°C to 70°C
Commercial
80 Lead PQFP
FS453, Tape & Reel
444-2134
0°C to 70°C
Commercial
80 Lead PQFP
FS454, Tape & Reel
444-2137
0°C to 70°C
Commercial
88 Lead FBGA
FS455, Tape & Reel
444-2138
0°C to 70°C
Commercial
88 Lead FBGA
FS456, Tape & Reel
Package Markings:
FOCUS
Enhancements
<FS45x><LF><solder>
<YYWWR>
<fab lot id>
where x = 3, 4, 5 or 6; LF = lead free; YY = year; WW = work week; R = die revision
solder = lead-free solder type (only present on devices with lead-free solder)
See
Note:
Any of the above SKUs can be ordered with lead-free solder. To place an order for a part with lead-free
solder, append “LF” to the end of the SKU. For example 444-2137LF would be an FS455 with lead-free
solder. All of these devices utilize the same die. They function identically except for Macrovision features
(enabled in FS454 :& FS456), package type, and solder type.
Please forward suggestions and corrections as soon as possible to the email address below. The
information herein is accurate to the best of FOCUS’ knowledge, but not all specifications have
been characterized or tested at the time of the release of this document. Parameters will be
updated as soon as possible and updates made available.
All parameters contained in this specification are guaranteed by: design, characterization, sample testing
or 100% testing as appropriate. Focus Enhancements reserves the right to change products and
specifications without notice. This information does not convey any license under patent rights of Focus
Enhancements, Inc. or others.
Critical Applications Policy
Focus Enhancements components are not designed for use in Critical Applications. Critical Applications
are products whose use may involve risks of death, personal injury, severe property damage or
environmental damage or life support applications, devices, or systems, wherein a failure or malfunction
of the component can reasonably be expected to result in death or personal injury. The user of Focus
Enhancements components in Critical Applications assumes all risk of such use and indemnifies Focus
Enhancements against all damages.
FOCUS Enhancements, Inc.
1370 Dell Avenue
Phone:
(408) 866-8300
Campbell, CA 95008
Fax:
(408) 866-4859
JANUARY, 2005, VERSION 3.0
41
COPYRIGHT
©2003-4 FOCUS ENHANCEMENTS, INC.
FOCUS Enhancements Semiconductor