Fisher PLC-XW20A - Manual (Page 11)

AUDIO OUT
AV
AUDIO IN
COMPUTER
USB
RESET
VIDEO
CONTROL PORT S–VIDEO
COMPUTER IN
Y – Pb / Cb – Pr / Cr
11
CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
When controlling a computer
with the Wireless Remote
Control Unit that is optionally
supplied, connect the mouse
port of the computer to this
connector. The Remote
Control Unit supplied with the
projector can not control a
computer. Consult your dealer
for details.(Refer to P12.)
Connect the S-VIDEO
output from video
equipment to this
jack. (Refer to P13.)
Connect the audio output
(stereo) from computer to
this jack. (Refer to P12.)
Connect the audio output
from video equipment to
this jack.
(Refer to P13.)
CONTROL PORT CONNECTOR
COMPUTER AUDIO
INPUT JACK
AUDIO INPUT JACK
VIDEO INPUT JACKS
S-VIDEO INPUT JACK
Connect the composite video
output from video equipment
to VIDEO/Y jack or connect
the component video outputs
to VIDEO/Y, Pb/Cb and
Pr/Cr jacks. (Refer to P13.)
Connect the computer
output to this jack.
(Refer to P12.)
COMPUTER INPUT
TERMINAL (ANALOG)
This projector has input and output terminals on its side for connecting computers and video equipment. Refer to figures on
pages 11 to 13 and connect properly.
Connect an external
audio amplifier to this
jack.
(Refer to P12, 13.)
AUDIO OUTPUT JACK
This projector uses a micro
processor to control this unit,
and occasionally, this micro
processor may malfunction
and need to be reset. This
can be done by pressing
RESET button with a pen,
which will shut down and
restart the unit. Do not use
RESET function excessively.
RESET BUTTON
When controlling a computer
with the Wireless Remote
Control Unit that is optionally
supplied, connect USB port of
the computer to this connector.
The Remote Control Unit
supplied with the projector can
not control a computer. Consult
your dealer for details. (Refer to
P12.)
USB CONNECTOR (Series B)