Fisher PLC-XW20A - Manual (Page 20)

20
Press FREEZE button on Remote Control Unit to freeze the picture
on-screen. To cancel FREEZE function, press FREEZE button again
or press any other button.
PICTURE FREEZE FUNCTION
KEYSTONE ADJUSTMENT
1 Press KEYSTONE ▲/▼ button on Remote Control Unit or select
Keystone on SETTING menu. (Refer to page 35.) Keystone
dialog box appears.
2 Correct keystone distortion by pressing KEYSTONE ▲/▼ button
or POINT UP/DOWN button(s). Press KEYSTONE ▲ button or
POINT UP button to reduce the upper part of image, and press
KEYSTONE
▼ button or POINT DOWN button to reduce the
lower part.
Reduce the upper width with KEY STONE ▲ button
or POINT UP button.
Reduce the lower width with KEY STONE ▼ button
or POINT DOWN button.
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
BASIC OPERATION
ADJUSTING SCREEN
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
Move ZOOM LEVER upward to make the image larger. Move ZOOM
LEVER downward to make the image smaller.
Rotate the FOCUS RING to adjust the projected picture focus.
FOCUS RING
WIDE
TELE
ZOOM LEVER
• Arrows are white in no correction.
• The arrow of direction being corrected turns red.
• The arrow disappears at the maximum
correction.