Fisher PLC-XW20A - Manual (Page 9)

9
PREPARATION
POSITIONING PROJECTOR
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating
ADJUSTABLE FEET. Projection angle can be adjusted to 10.6
degrees.
Lift the front of a projector and pull FEET LOCK LATCHES
on the both sides of a projector. 1
ADJUSTABLE FEET
FEET LOCK
LATCHES
Release FEET LOCK LATCHES to lock ADJUSTABLE FEET
and rotate ADJUSTABLE FEET to adjust position and tilt. 2
To retract ADJUSTABLE FEET, lift the front of a projector
and pull and undo FEET LOCK LATCHES.
Keystone distortion of a projected image can be adjusted by
Menu Operation. (Refer to P20 and 35.) 3
CAUTION
Avoid positioning a projector with the angle of more than 20
degrees. Projection Lamp may malfunction.
● This projector is designed to project on a flat projection surface.
● The projector can be focused from 5.3’(1.6m) ~ 26.6’(8.1m).
● Refer to the figure below to adjust a screen size.
40”
100”
150”
200”
166”
123”
83”
34”
H1
H2
26.6’ (8.1m)
19.7’ (6.0m)
13.1’ (4.0m)
5.2’ (1.6m)
ROOM LIGHT
The brightness in a room has a great influence on
picture quality. It is recommended to limit
ambient lighting in order to provide the best
image.
Max. Zoom
Min. Zoom
H1 : H2 = 19 : 1
Screen Size
(W x H) mm
Zoom (min)
40”
Zoom (max)
813 x 610
6.2' (1.9m)
5.2’ (1.6m)
100”
2032 x 1524
16.1' (4.9m)
13.1’ (4.0m)
150”
3048 x 2286
24.0' (7.3m)
19.7' (6.0m)
200”
4064 x 3048
–––––
26.6’ (8.1m)
34"
691 x 518
5.2’ (1.6m)
–––––