FUJITSU MB3773 - Manual (Page 27)

MB3773
27
(Continued)
8-pin plastic FPT
(FPT-8P-M01)
Note 1 : *1 : These dimensions include resin protrusion.
Note 2 : *2 : These dimensions do not include resin protrusion.
Note 3 : Pins width and pins thickness include plating thickness.
Note 4 : Pins width do not include tie bar cutting remainder.
Dimensions in mm (inches) .
Note : The values in parentheses are reference values.
C 2002 FUJITSU LIMITED F08002S-c-6-7
0.13(.005) M
Details of "A" part
7.80±0.40 5.30±0.30
(.209±.012) (.307±.016)
.250 –.008
+.010
–0.20
+0.25 6.35
INDEX
1.27(.050)
0.10(.004)
1 4
5 8
0.47±0.08
(.019±.003)
–0.04
+0.03 0.17
.007
+.001
–.002
"A" 0.25(.010)
(Stand off)
0~8˚
(Mounting height)
2.00
+0.25
–0.15
.079
+.010
–.006
0.50±0.20
(.020±.008)
0.60±0.15
(.024±.006)
0.10 +0.10
–0.05
–.002
+.004
.004
* 1
0.10(.004)
* 2