Notices for use anti-cool wind function – Friedrich MW12C1H User Manual
Page 6
Advertising
Notices for use
Anti-cool wind function:
In "Heat" mode, under the following three kinds of state, if indoor heat exchanger doesn't
2 mins):
1. Heating starts. 2.After Auto Defrost finished. 3.Heating under the low temperature.
The operating temperature range (outdoor temperature) for cooling unit is 32~115;
for cooling and heating unit is 5 ~115 .
.
Working temperature range
Maximum cooling
Minimum cooling
Maximum heating
Minimum heating
Indoor sideDB/WB( )
Outdoor sideDB/WB( )
95/75
70/59
75/---
68/---
115/86
70/-
75/60
5/-
ºF
ºF
arrive at certain temp., indoor fan will not
, in order to prevent cool wind blowing(within
start
2
Advertising