7 setting chap authentication – FUJITSU Eturneus Disk Storage System (ISCSI) for VMware ESX User Manual
Page 29
6.1.7
Setting CHAP Authentication
CHAP and mutual CHAP authentication can be set for VMware ESX connections.
Log in to VMware ESX from the vSphere Client, check whether the ETERNUS DX Disk storage system LUNs
have been recognized, and then enable the CHAP authentication.
The procedure is as follows:
1
Select the [Configuration] tab on vSphere Client and select [Storage Adapters].
2
Select the target iSCSI Software Adapter and click [Properties].
3
Select the [General] tab and click [CHAP].
4
Set CHAP.
•
When setting CHAP only
Select [Required] for [Select option:] under "CHAP" and set the [Name:] and [Secret:].
•
When setting CHAP and mutual CHAP
Select [Required] for [Select option:] under "CHAP" and "Mutual CHAP" and set the [Name:] and [Se-
cret:].
Chapter 6 Setting Up the VMware ESX Server
6.1 For VMware vSphere
29
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
®
ESX
Copyright 2013 FUJITSU LIMITED
P3AM-3412-13ENZ0