FUJITSU Eturneus Disk Storage System (ISCSI) for VMware ESX - Manual (Page 31)

6.2.1 Turning on the Devices
To turn on the connected devices, use the following procedures:
1 Turn on the LAN switch power.
2 Check that the LAN switch's Ready (or equivalent) LED is lit.
3 Turn on the ETERNUS DX Disk storage system.
4 Check that the Ready LED is lit on the ETERNUS DX Disk storage system.
5 Turn on the server.
6.2.2 Checking the LAN Cards
1 Select the [Configuration] tab on VMware Infrastructure Client.
2 Check the iSCSI SAN configuration Network Adapters.
"vmnic1" and "vmnic2" in the following example.
Chapter 6 Setting Up the VMware ESX Server
6.2 For VMware Infrastructure 3
31
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware ® ESX
Copyright 2013 FUJITSU LIMITED
P3AM-3412-13ENZ0