Falcon F3400 - Manual (Page 13)

www.rletech.com 13 970.484.6510
C
H A P T E R
C HAPTER 0
S
YSTEM
O
VERVIEW
1.1. Product Description
The F3400/F1000 monitoring system is a comprehensive system which provides additional
equipment protection by monitoring critical operating parameters in enterprises, remote
network facilities, communication rooms, remote and unmanned facilities, and critical support
systems. The F3400/F1000 is a stand alone system. It operates via an embedded Web server
that handles all data collection, alarm reporting, and multiple concurrent communication
mediums.
The F3400/F1000 typically monitors analog and dry contact outputs from devices such as
temperature sensors, humidity sensors, thermistors, gas detectors, smoke detectors, fire
suppression systems, surveillance products (e.g., IP cameras), leak detection systems, power
monitoring systems, uninterruptible power supplies (UPSs), power distribution units (PDUs),
generators, DC power plants, commercial power, HVAC units, ATS and TVSs.
The F3400/F1000 performs internal diagnostics that check the Flash Program code, serial ports,
RAM, non-volatile RAM, real-time clock, internal power supplies, relay drivers, analog to
digital converter (ADC), and modem. During operation, the F3400/F1000 monitors its status
and uses several LED indicators to report its condition.
The F3400/F1000’s embedded firmware enables system configuration, I/O setup, status
inquiries, alarm reports, data logs, and troubleshooting. The F3400/F1000 is menu driven and
operates with any Web browser, ASCII terminal or terminal emulation application such as
HyperTerminal.