Document Outline

• System Overview
  • 1.1. Product Description
  • 1.2. Front Panel Indicators and Controls
  • 1.3. Terminal Block Designations
  • 1.4. Rear Panel Indicators
  • 1.5. SW1 Switch Settings
• Getting Started
  • 2.1. Installation
  • 2.2. Communication
  • 2.3. Set the F3400/F1000’s IP Address
    • 2.3.1 Set the F3400/F1000's IP Address using the ARP and PING Commands
      • 2.3.1.1 Obtain the Ethernet Address
      • 2.3.1.2 Use the ARP Command
      • 2.3.1.3 Use the PING Command
      • 2.3.1.4 Troubleshooting the ARP/PING Commands
    • 2.3.2 Set the F3400/F1000’s IP Address using a Web Browser
    • 2.3.3 Set the F3400/F1000’s IP Address Using an EIA232 Connection
    • 2.3.4 Set the F3400/F1000's IP Address using a Telnet Connection
  • 2.4. F3400/F1000 Wiring
    • 2.4.1 Power Supply and Ground Connections
    • 2.4.2 EIA232 COM1 Connection
    • 2.4.3 RJ11 Phone Line Connection
    • 2.4.4 RJ45 Ethernet Connection
    • 2.4.5 Relay K1 and K2 Connection
• F3400/F1000 Web Interface
  • 3.1. F3400/F1000 Web Interface Overview
  • 3.2. Main Menu
    • 3.2.1 Historical Data
      • 3.2.1.1 Alarm History
      • 3.2.1.2 Event History
      • 3.2.1.3 Digital Status History
      • 3.2.1.4 Web User Access Log
      • 3.2.1.5 Data History
      • 3.2.1.6 Minute, Hour, and Day View
      • 3.2.1.7 Data History Text Downloads
      • 3.2.1.8 Server History
      • 3.2.1.9 Server Status
  • 3.3. Identity
  • 3.4. Web Links
  • 3.5. Configuration
• Configuration Menu
  • 4.1. Inputs
  • 4.2. Relays
  • 4.3. Schedules
  • 4.4. Alarm Management
  • 4.5. Modem
    • 4.5.1 Configure Phone Numbers
  • 4.6. Web Links
  • 4.7. Egg/Nest
  • 4.8. Falcon Links
  • 4.9. SNMP/SYSLOG
  • 4.10. Modbus Interface
    • 4.10.1 LD Unit Modbus Slave Configuration
    • 4.10.2 Modbus Register Data Log
    • 4.10.3 Modbus Packet Log
    • 4.10.4 Reset Modbus Port
    • 4.10.5 F-Series Modbus Slave Register Map
  • 4.11. BACnet
  • 4.12. Server Ping
  • 4.13. System
  • 4.14. Clock
  • 4.15. Internet Protocol
  • 4.16. User Administration (Web Access)
  • 4.17. Email
  • 4.18. Network Time Protocol
  • 4.19. Network Statistics
  • 4.20. Flash Program
  • 4.21. Product Registration
• EIA-232 Interface
  • 5.1. Unit Start Up
  • 5.2. Flash Executable Code
  • 5.3. Main Menu
    • 5.3.1 Main Configuration Menu – SC
    • 5.3.2 IP Configuration Menu
• Remote Access
  • 6.1. Remote Access Configuration (Modem Option)
• Point-to-Point Protocol
  • 7.1. Configuring the F3400/F1000
  • 7.2. Configuring the PC
• Upgrading Firmware and Managing Configuration Data
  • 8.1. Upgrading F3400/F1000 Firmware
    • 8.1.1 Upgrading F3400/F1000 Firmware via TFTP Client
    • 8.1.2 Updating F3400/F1000 Firmware via the EIA232 COM1 Port (X-Modem)
  • 8.2. Loading/Saving F3400/F1000 Configuration Data
    • 8.2.1 Saving Configuration Data via TFTP Client
    • 8.2.2 Saving Configuration Data via EIA232 COM1 Port (X- Modem)
    • 8.2.3 Loading Configuration Data via TFTP Client
    • 8.2.4 Loading Configuration Data via EIA232 COM1 Port (X-Modem)
• Analog Input 4-20mA Reference Chart
• F3400/F1000 Accessories Wiring
  • B.1. Configuring the SeaHawk LD5100 as an Analog Input
• Alarm ID Reference Tables
  • C.1. Analog Tables
  • C.2. Thermistor Tables
  • C.3. Digital Tables
• Technical Specifications