Getting started, Installation, Communication – Falcon F3400 User Manual
Page 19: Set the f3400/f1000’s ip address, Etting, Tarted
www.rletech.com
19
970.484.6510
C
H A P T E R
C
HAPTER
0
G
ETTING
S
TARTED
2.1. Installation
The F3400/F1000 comes in a 19 inch (.48m) rack mount enclosure. Install the F3400/F1000 in
the rack. Use the proper anchoring method to mount the unit securely. Supply the 24VDC to the
unit.
2.2. Communication
The F3400/F1000 will not communicate over a user’s network the first time it is connected to
the network. The manufacturer programs the F3400/F1000 with a default IP address:
10.0.0.186, subnet: 255.255.255.0. This default address must be changed to an IP address that
corresponds with the user's network before the F3400/F1000 can communicate over the
network.
2.3.
Set the F3400/F1000’s IP Address
There are four ways to set the F3400/F1000’s IP address:
Via the ARP and PING commands
Via the Web browser
Via the EIA232 interface
Via Telnet commands