FUJITSU fi-4990C - Manual (Page 78)

6-26
<<SETUP MODE>>
<<SETUP MODE>>
Consumable Alarm Mode
<<SETUP MODE>>
Consumable Alarm Mode
1. <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
2. Press repeatedly until “Consumable
Alarm Mode” appears in the lower line of the
menu screen.
3. Press
ENTER
.
The current option list screen appears with
“Alarm & Stop scanning” blinking (blinking
indicates “changeable”).
4. Press or .
The displayed option changes (“Message
only” blinks).
5. When the desired option appears, press
ENTER to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (Consumable Alarm Mode).
6. To quit the <<SETUP MODE>>, turn off the
power.
Consumable Alarm Mode
Alarm & Stop scanning
The following is an example of operation when you change the setting.
Consumable Alarm Mode
Message only
<<SETUP MODE>>
Paper Length Check
14C6.P65 01.2.17, 5:46 PM 26