FUJITSU fi-4990C - Manual (Page 82)

6-30
Picking speed
Fast
(factory default)
Middle
Slow
“Mis-pick” frequently occurs.
Make the picking
speed slow.
Set “picking speed” according to the table below.
4. Press or .
The displayed option changes (
■ ■ ■ ❑ ❑ ❑
to ■ ■ ■ ■ ■ ■ , ❑ ❑ ❑ ❑ ❑ ❑ or ■ ❑ ❑ ❑ ❑
❑
).
5. When the desired option appears, press
ENTER
to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (LCD Contrast).
6. Press
CANCEL
two times.
The LCD returns to the Ready screen.
<<SETUP MODE>>
LCD Contrast
LCD Contrast
Dark
■ ■ ■ ❑ ❑ ❑
Bright
Ready
Picking speed
This function sets the rotational speed of the pick roller. Slow speed is recommended when you use
thin or flexible paper which is liable to mis-pick.
Remarks LCD display
Picking Speed
Options
Slow, Middle, Fast (Default: Fast)
NOTE
Processing speed of scanning is reduced when the picking speed is set “Slow” or “Middle”.
14C6.P65 01.2.17, 5:46 PM 30