Fender SRM 8302 - Manual (Page 12)

12
SRM WITH AN EXTERNAL MONITOR POWER AMP FOR MONITOR SPEAKERS
1. Connect a cord from the Mon Out jack to the
monitor power amp and system. With an external
monitor power amp, the SRM’s second power
amp may be assigned to the main bus for
additional power to the front of house speakers.
When PA 2 is assigned to the main front of house
enclosures, be sure one enclosure is connected to
the PA 1 Out jacks and the other is connected to
the PA 2 Out jacks.
2. The Monitor control in the master section adjusts
the signal level to the monitor power amp.
3. Be sure to turn the tape deck, keyboard or other
instruments and gear on first, then the SRM 6302 /
8302.