Fujitsu Siemens Computers MCM 17P2 - Manual (Page 18)

Color monitor MCM 17P2
10 - English A26361-K581-Z100-2-5E19
Changing the monitor settings
Using the buttons on the control panel and the setting control on the underside of the monitor, you
can call and operate the integrated OSD menu (On-Screen Display) on screen.
i
The OSD menu is available in five languages. The English menu names are used in the
following description (default setting). How you set a different language for the OSD menu
is described in the section "Setting display options (ADVANCED CONTROLS)".
1 2 3 4
1 = Bright button
2 = Contrast button 3 = OSD button
4 = Setting control (on underside of monitor)
Adjusting the brightness and contrast
Contrast and brightness are adjusted directly with the corresponding buttons.
i
You will increase the life of your screen if you adjust the contrast and brightness to
medium.


Press the Brightness or Contrast button.
A window is displayed with a setting range.


Turn the setting control to set the desired function.
The setting window disappears after approximately 5 seconds if no further setting is made. All
changes are stored automatically.