Fujitsu Siemens Computers MCM 17P2 User Manual
Page 21
Color monitor MCM 17P2
A26361-K581-Z100-2-5E19
English - 13
Setting the picture geometry (GEOMETRY)
Tilt distortion must be set when the screen display is not axially symmetrical.
Pincushion distortion is when the sides of the screen display are bent inward or outward. Trapezoid
distortion is when the top or bottom of the screen display is too wide or too narrow. Parallelogram
distortion means that the sides of the picture bend to the left or right.
Calling the
GEOMETRY
sub menu
Picture rotation (
ROTATION
): Rotating the picture in a clockwise or counter-
clockwise direction
Pincushion distortion (
PINCUSHION
): Bending the right and left side inward or
outward
Trapezoid distortion (
TRAPEZOID
): Making the bottom edge narrower and the top
edge wider or making the top edge narrower and the bottom edge wider
Asymmetrical pincushion distortion (
BALANCED PINCUSHION
): adjusting right and
left side symmetrically
Parallelogram distortion (
PARALLEL
): Reducing the angle of the left and right sides
Saving the setting and returning to the main menu
Aborting and returning to the main menu