Fujitsu Siemens Computers MCM 17P2 - Manual (Page 26)

Color monitor MCM 17P2
18 - English A26361-K581-Z100-2-5E19
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA
interface, it can automatically read the data for ensuring optimum operation from your monitor and
select the appropriate settings.
i
If the monitor MCM 17P2 is not yet displayed in the list of monitors, you can select one of
the following monitors instead:
Fujitsu Siemens, Siemens or Siemens Nixdorf
MCM 17P1, MCM 1707, MCM 1706, MCM 1705, MCM 1704, MCM 1702
Preset operating modes
i
The display position and size have been set to optimum values at the factory for the
operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save
the settings (see "
Operation of the monitor ").
Horizontal frequency Refresh rate Screen resolution
31.5 kHz
31.5 kHz
50.6 kHz
53.7 kHz
63.9 kHz
68.7 kHz
80.8 kHz
91.2 kHz 59.9 Hz
70.1 Hz
100.0 Hz
85.1 Hz
100.0 Hz
85.0 Hz
100.0 Hz
85.0 Hz
640 x 480
720 x 400
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1280 x 1024
For ergonomic reasons we recommend a refresh rate of at least 75 Hz and a maximum resolution of
1024 x 768 pixels.