Fujitsu Siemens Computers MCM 17P2 - Manual (Page 23)

Color monitor MCM 17P2
A26361-K581-Z100-2-5E19 English - 15
Setting display options (ADVANCED CONTROLS)
With the options in the ADVANCED CONTROLS submenu the energy saving mode of the monitor
(power management) can be switched on/off, the language for the OSD menu selected, DDC1/2B
switched on/off, the display time of the OSD menus set and the moiré effect corrected.
Calling the ADVANCED CONTROLS sub menu
Switch energy saving mode on/off ( POWER SAVING ON/OFF )
To use the power management of the monitor, the function should normally be
switched on.
Setting language for the OSD menu
You can choose from English (default setting), German, French, Italian and
Spanish.
Setting display time for the OSD menu ( OSD TIMER )
You can select between 5, 10, 25 and 50 seconds. If the adjusted time has run out
without the settings being saved, the OSD menu is automatically closed.
Correcting the Moiré effect ( MOIRE )
If the picture you see on screen has light and dark stripes or appears dull and
blurred, this may be due to what is known as the moiré effect. This effect usually
has physical causes, being triggered by interference between the pixels in the
matrix and the video signal. The intensity of the moiré effect is dependent on the
screen resolution and picture size.
In some cases, moiré correction may cause the picture quality to deteriorate
(reduced picture definition, slight flickering.)
H = Horizontal moiré correction
V = Vertical moiré correction
Saving the setting and returning to the main menu
Aborting and returning to the main menu
Displaying display information (MONITOR STATUS)
The window is only used to display the information. You cannot select a different setting here.
Details of how you set the resolution and refresh rate are provided in the documentation on your
screen controller/the associated driver software.
Displaying display information ( MONITOR STATUS )
The current settings and the serial number for your monitor are displayed on
screen.