FUJITSU TX120 - Manual (Page 35)

TX120 Operating Manual 35
Hardware installation Setting up the server
4.2 Setting up the server
Ê Install the server.
I
Note that the server may be operated in the vertical (see section
“Positioning the server vertically” on page 36 ) or horizontal position
(see section “Positioning the server horizontally” on page 39 ).
V
CAUTION!
– The device must be protected from direct sunlight.
– The required minimum distances for operation and maintenance
areas must be adhered to.
– The server must be accessible at the rear for connection to other
devices (e.g. memory subsystem).
– The mains plug must be accessible easily and safely.
– To ensure sufficient ventilation of the system, a minimum clear
distance of 200 mm must be provided at the front and the rear of
the server.
Ê Wire the server. Follow the instructions in the sections “Connecting devices
to the server” on page 40 and “Notes on connecting/disconnecting cables”
on page 42 .
Ê Connect the server to the mains (see section “Connecting the server to the
mains” on page 41 ).