Fluke 35040 - Manual (Page 31)

Operation
Battery Care
3
3-7
instrument will not be available for use. Depending upon the level of discharge, this period of
unavailability may be on the order of days, and in extreme cases the battery will be permanently
damaged.
3.9 Operation Instructions
This section contains detailed instructions on the front panel operation of the Model 35040 Therapy
Dosimeter. Please note that the display examples shown here correspond to a particular customization
set-up. Other customization set-ups will produce different results.
3.9.1 Front Panel Controls
Figure 3-5 shows the front panel of the Model 35040 Therapy Dosimeter. The front panel consists of a
triax connector, control buttons and a display. The following paragraphs describe the operation of each
control button and the corresponding display screens.
Figure 3-5. The Model 35040 Therapy Dosimeter Front Panel
Power
The POWER button toggles the system power on and off.
Test Function
The TEST FUNCTION button displays the Test Function screens. It is also used in setting the start and
stop exposure current thresholds.
• When the Test Function screen is not displayed, pressing the TEST FUNCTION button displays the
Test Function screen and the information/settings that were last viewed since power-up.
The TEST FUNCTION screen provides access to
information and settings such as the firmware
revision, charge and current scale factors, battery
NOTE