Furuno 1763C User Manual
Page 180
5. CUSTOMIZING YOUR UNIT
5-8
4. Select function desired with the cursor pad or [ENTER] knob and press the
ENTER soft key or [ENTER] knob to register your selection.
5. Press the [MENU] key to close the menu.
Radar function keys
Menu Item
Function
Function Key Label
OFF
Assigns no function.
—
HL: HDG LINE OFF
Turns heading line off.
HL
MOD: MODE
Selects presentation mode.
MOD
GAI: GAIN
Shows gain sensitivity adjustment window.
GAI
SEA: A/C SEA
Shows manual or A/C SEA adjustment window.
SEA
RAI: A/C RAIN
Shows A/C RAIN adjustment window.
RAI
FTC: FTC
Displays FTC window. Adjust FTC with the [ENTER] knob.
FTC
ES: ECHO STRETCH
Turns echo stretch on/off.
ES
PLS: PULSE LENGTH
Sets pulselength (long or short).
PLS
ZOM: ZOOM
Turns zoom on/off.
ZOM
SFT: OFFCENTER
Press to shift display center to cursor location. Press again to
turn shift off and return cursor to display center.
SFT
TRL: ECHO TRAIL
Starts/stops echo trails.
TRL
RNG: RINGS ON/OFF
Turns range rings on/off.
RNG
TLL: TLL OUTPUT
Outputs cursor position, in NMEA format, to navigator.
TLL
ALM: GUARD ALARM
Displays alarm soft keys.
ALM
EBL: EBL
Switches control between EBL1 and EBL2 with each press.
EBL
VRM: VRM
Switches control between VRM1and VRM2 with each press.
VRM
TTM: TTM ON/OFF
Turns TTM (Tracked Target (Message) data on/off.
TTM
WMK: WPT ON/OFF
Turns waypoint marker on/off.
WMK
WTM: WATCHMAN
Turns watchman on/off.
WTM
ACQ: ACQUISITION
Acquires and tracks cursor-selected target.(Requires
ARP-equipped Model 1833/1833C series network radar.)
ACQ
TX: STBY/TX
Toggles between standby and transmit.
TX
RSR: RADAR SOURCE
Selects source for radar picture.
RSR
DBX: D. BOX ON/OFF
Turns data boxes on/off.
DBX
CHG: CHANGE CNTRL*
Changes display control in combination display.
CHG
*: When selecting CHG on a display, use the same soft key number on all display for CHG.