Furuno 1763C - Manual (Page 87)

3. PLOTTER OPERATION
3-3
3.1.2 Compass display
The compass display, displayed at the bottom half of the screen in the
combination display, provides steering information. The compass rose shows
two triangles: the black triangle (hollow on monochrome model) shows the
bearing to destination waypoint and the red (solid on monochrome) triangle,
which moves with ship’s course, shows own ship’s course.
The water temperature and depth graphs, which require appropriate sensors,
show the latest 10 minutes of temperature and depth data. The range of the
depth graph is 50 feet and it is automatically adjusted with depth.
Bearing scale
XTE monitor (See next page for description.)
Depth
graph* Water
temperature
graph*
Time-to-go
to destination Estimated time of
arrival at destination
Ship's course
(red and filled
on
color model, filled
on monochrome model
)
Destination
waypoint
Range to destination waypoint
Speed over ground
* = Requires appropriate
sensor.
Destination
waypoint bearing
(black and filled
on color model,
hollow on mono-
chrome model)
0
50
20
10
BRG DPT TMP
3 5 9 . 9 ° M
4 5 . 2 f t
1 6 . 2 ° F
3 5 9 . 9
°
M
003WPT
0D 9H 59M TTG 23th23:59 ETA
SOG 10.0 kt 10.0 kt STW
RNG 9 9 . 9 n m
N
w
E
Speed through water
CSE
Direction to steer
(green on color model) Shown (in red on
color model) when
direction to steer
is "left."
Own ship marker
(For color model, black when within XTE range,
yellow when over; flashes when over XTE range
on monochrome model)
Compass display