Furuno 1763C User Manual
Page 250
SP - 4 E3494S01K
Wind: MWV>VWT>VWR
Water Temperature:
MTW
Time: ZDA
*1
: calculated by magnetic deviation
4.6. Output
Data
Alarm signal
12 VDC, 100 mA or less
NMEA 0183 Ver1.5
GGA, GLL, RMA, RMC, GTD, VTG, ZDA (GPS data required)
RMB, WPL, BWC or BWR, APB, AAM, BOD, XTE, VHW, MTW,
DPT or DBT, DBS (ETR required), TTM (ARPA required)
5. PLOTTER FUNCTION
5.1 Projection
Mercator
5.2 Usable Area
85 latitude or below
5.3 Effective Area
133.4 x 97.3 mm
5.4 Display pixels
240 x 320 dots (M1722 series), 234 x 320 dots (M1722C series),
480 x 640 dots (1723C series)
5.5 Position Indication
Latitude/longitude, Loran C LOP or DECCA LOP
5.6 Effective Projection Area
0.125 nm to 2,048 nm (at equatorial area)
5.7 Track Display
Plot interval: by time (1 s to 99 m 59 s) or
by distance (0 to 99.9 nm)
5.8 Colors
Red, yellow, green purple, light-blue, blue, white
5.9 Memory Capacity
Track/mark: 8000 points, Waypoint: 999 points
5.10 Storage Capacity
Simple route: 200 routes with 35 waypoints each
5.11 MOB
1 point
5.12 Quick Routes
1 course with 35 waypoints max.
5.13 Electronic Chart
FURUNO chart card or NAVIONICS chart card available
C-MAP chart card also available for C-MAP NT Model
5.14 Alarms
Arrival and anchor watch, Cross track error and proximity alarms,
Ship’s speed in and out alarms, Water temperature, Trip alarm,
Bottom alarm, Fish alarm (ETR required)
6. POWER SUPPLY
6.1 Rated
Voltage/Current
M1722
12-24 VDC: 3.8-1.9 A
M1732
12-24 VDC: 3.8-1.9 A
M1742/1752
12-24 VDC: 4.6-2.3 A
M1762
12-24 VDC: 5.7-2.9 A
M1722C
12-24 VDC: 4.0-2.0 A
M1732C
12-24 VDC: 4.0-2.0 A