Furuno FA-30 - Manual (Page 12)

4
1.4 Wiring
Connect power source, LAN cable, VHF antenna and ground wire as shown
below.
*1 Supply from breaker on switchboard.
*2 If COM lines (connection for NavNet, sensor) are not used, tape them to prevent
short circuit.
VHF WHIP
ANTENNA
(option)
RED BLACK
PC, HUB,
NAVNET
GROUND
COAXIAL CABLE 5D-2V
(local supply)
GROUND WIRE
IV-1.25sq
LAN CABLE
P5E-4PTX-BL
(2 m or 10 m)
AIS RECEIVER
POWER CABLE
(supplied)
NAVNET, SENSOR
12-24 VDC
RS-422 RATING
Switchboard breaker
+ -
*1 *2