4 sensor status – Furuno FA-30 User Manual
Page 20
Advertising
12
2.4
Sensor Status
The sensor status display provides information about sensors connected to the FA-30.
1. Show the main menu, referring to section 2.2.
2. Click Sensor Status. The illustration below shows typical sensor status indications.
*
1
Whichever navigator is in use.
*
2
Displayed for 30 seconds after changing channel parameters. (It is necessary to
update the display.)
Description of sensor status indications
Indication
Meaning
Remarks
DGPS in use
DGPS currently in use
See *
1
GPS in use
GPS currently in use
See *
1
SOG/COG in use
SOG/COG currently in use
Heading valid
Valid heading data
Channel Management
Parameters Changed
Channel parameters have been changed.
See *
2
GPS in use
Heading valid
Channel Management Parameters Changed
Advertising