Furuno FA-30 - Manual (Page 26)

FURUNO
FA-30
SP-2 E4443S01A
3. INTERFACE
3.1 COM port Input: RS422(38.4kbps)/IEC61162-1(4800 bps)
Output: RS422(38.4kbps)
Input sentences: ACK, ACA, DTM, GBS, GGA, GLL, GNS, HDT,
OSD, RMC, VBW, VTG, DSC, DSE, AIQ, ZDA, PFEC, ABM*,
BBM*, AIR*
Output sentences: ACA, ACS, ALR, VDM, VDO, TXT, ABK*, PFEC
3.2 NETWORK Ethernet 10/100BASE-T
Input sentences: ACK, ACA, DTM, GBS, GGA, GLL, GNS, HDT,
OSD, RMC, VBW, VTG, DSC, DSE, AIQ, ZDA, PFEC, ABM*,
BBM*, AIR*
Output sentences: ACA, ACS, ALR, VDM, VDO, TXT, ABK*, PFEC
* ABK sentence sent in response to mis-input of ABM, BB M, AIR.
4. ANTENNA
50 ohm single dipole antenna
5. POWER SUPPLY
12-24 VDC: 1.2-0.6 A
6. ENVIRONMENTAL CONDITION
6.1 Ambient Temperature -15°C to +55°C
6.2 Relative Humidity 93% at 40°C
6.3 Waterproofing (IEC 60529) IP20
6.4 Vibration (IEC 60945 ed.4)
- 2Hz to 5 Hz and up to 13.2 Hz with an excursion of ±1 mm ±10%
(7m/s 2 maximum acceleration at 13.2 Hz )
- above 13.2 Hz and up to 100 Hz with a constant maximum
acceleration of 7 m/s 2
7. COATING COLOR
N2.5