Fisher & Paykel RX256 - Manual (Page 17)

15
Temperature controls (RX256DT7X1)
Your refrigerator has a User Preference menu, in which you can alter settings to suit you.
To access the User Preferences menu, press and hold the DOOR ALARM button for three seconds.
When in the User Preferences menu, a short title for the feature will appear in the freezer
temperature display and the feature status will appear in the refrigerator display.
Use the freezer or buttons to scroll through the features.
When the desired feature is displayed, use the refrigerator or buttons to change the
status.
When changes are complete close the fresh food door.
The following features can be accessed through the User Preferences menu.
Display (F_C)
Change the display to show the temperature in degrees Fahrenheit (F) or degrees Celsius (C).
Alarm (AL)
When the Alarm Mode is OFF, no audible alarms will sound.
Auto Light Level Selection (LL)
When Auto Light is activated, it controls the level at which the dispenser light will illuminate
when the sensor detects the light levels in the room are low (see page 21). Setting 1 is the
darkest light level setting, setting 9 is the lightest light level setting.
Sabbath Mode (SAB)
When the Sabbath Mode is ON, all control and exterior lights will be disabled until the feature
is turned OFF. This feature does not disable the interior lights. Press any button to restore the
control lights, and turn off Sabbath Mode.
Note: Warm cabinet surfaces
At times the front of the refrigerator cabinet may be warm to the touch. This is a normal
occurrence that helps prevent moisture from condensing on the cabinet. This condition will be
more noticeable when the refrigerator is first started, during hot weather and after excessive or
lengthy door openings.
EN