Frymaster GBC EN - Manual (Page 35)

2-15
2.8 Drain Components
4
7
7
3
2
6
9
1
8
5
4
NOTE: Items 1, 4, 8, and 9
are also used on the rinse tank.
Plumbing from the rinse tank
drain valve to the floor drain is
locally procurred and installed.
This rubber seal is an
integral part of item 7.
This nut, for attaching the handle, is
an integral part of item 1. If it must
be replaced, order P/N 809-0063.
ITEM PART # COMPONENT
1 810-1825 Valve, 1¼-inch x 1¼-inch SS Drain
2 813-0070 Elbow, 1¼-inch NPT BM 90°
3 813-0146 Nipple, 1¼-inch NPT x 4¼-inch BM
4 813-0391 Nipple, 1¼-inch NPT x Close BM
5 813-0394 Tee, 1¼-inch NPT BM
6 813-0451 Nipple, 1¼-inch NPT x 12-inch Chromed Brass
7 813-0453 Nut, 1¼-inch NPT Chromed SS Slip
8 814-0047 Sleeve, Valve Handle (red, w/logo)
9 910-9527 Handle, Drain Valve