Fisher LNS-W03 - Manual (Page 5)

1. Remove screws A (2 screws).
2. Push part B and pull Upper Lens Cover up.
1
Fig-1
Fig-2
2
REMOVE THE UPPER LENS COVER. (See figure-1)
(At the step , insert the light-block sheet in
the same position as the removed cover plate
has been placed. Two screws are not used.)
6
Perform the steps to for lens replacement and installation. 7 1
First set the lens at the center position with lens shift adjustment.
UPPER LENS
COVER
A
LOWER LENS
COVER
C
COVER PLATE
UPPER LENS
COVER
D
C
B
Fig-3
1. Remove screws C (4 screws).
2. Pull Lower Lens Cover toward front and
remove.
REMOVE THE LOWER LENS COVER. (See figure-2)
3
1. Remove screws D (2 screws) and Cover
Plate on the back of Upper Lens Cover.
REMOVE THE COVER PLATE. (See figure-3)
LENS REPLACEMENT AND INSTALLATION PROCEDURE (Type 2 Cabinet)
-4-