Franke Consumer Products FFPD100 - Manual (Page 7)

7
ENGLISH
Replacing the Headvalve
1. Shut off the water supply to the faucet.
2. Open the faucet briefly to relief any pressure inside the faucet.
3. Move the faucet knob to the “OFF” position.
4. Use a the provided allen key to loosen the set screw which is accessible from the back
of the handle.
5. Lift the handle from the headvalve.
6. Unscrew then the headvalve using a 17 mm wrench and replace it.
7. Reinstall all the details, proceeding in opposite order.
2 mm [1/16”] key
17 mm [11/16”] key
General maintenance
Clean aerator periodically.
Do not use harsh detergents, solvents, chemical agents, metallic sponges, etc. that could
harm the surface.
Clean only with a soft sponge and soapy water,
Clean and then dry properly the faucet in case of very hard or calcareous water, whose
deposits cold damage the surface.